16410 Kilbourn Ave, Oak Forest, IL · Get directions 708-629-0825 info@elitecoatingsmidwest.com
Citadel EP-55 Water-Based Epoxy Primer
Citadel

Citadel EP-55 Water-Based Epoxy Primer

Primers & Basecoats

Citadel EP-55 is a two-component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult-to-coat or marginally prepared substrates. Substrates include hard-troweled concrete, aluminum, and various types of tiles.

Color
Black, White

Price

Call or request today's price

  • In stock locally in Oak Forest, IL
  • Technical support from experienced installers
  • Pickup at our Oak Forest warehouse

Product Details

Citadel EP-55 is a two-component, water-based epoxy primer designed to improve the adhesion of floor coatings over difficult-to-coat or marginally prepared substrates. Substrates include hard-troweled concrete, aluminum, and various types of tiles.

Recommended Uses

  • Use as an alternative to traditional mechanical and chemical surface preparation.
  • Compatible with most floor coating technologies.

Data sheets and application help

Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See www.P65Warnings.ca.gov.

Why Contractors Use It

  • Water-based two-part epoxy primer that helps coatings grip hard-to-coat or marginally prepared surfaces
  • Can stand in for conventional mechanical or chemical surface prep
  • Accepts most floor coating types (acrylics, epoxies, polyurethanes) as a topcoat
  • Can be topcoated without sanding between 5 hours and 7 days
  • VOC compliant nationwide (0 g/l)

Where to Use It

  • Hard-troweled concrete
  • Aluminum
  • Various types of tile
  • Primer/basecoat for warehouse line striping and zone marking
  • Primer for solid-color and decorative systems, including metallics

How to Apply

  1. Let new concrete cure 30 days; clean off oil, grease and contaminants and rinse; confirm any existing coating passes an X-cut tape adhesion test
  2. Power mix the base separately if settled, then combine base and activator at 4:1 by volume
  3. Mix with a Jiffy-style or plunge mixer at 500-750 rpm for 2-3 minutes until color is uniform; mix only what you can use in 45 minutes
  4. Apply at 50-85°F, surface at least 5°F above dew point and RH below 85%
  5. Roll on with a lint-free 3/8 in. phenolic-core roller (brush for cut-in), avoiding excess film thickness

Coverage & Cure

Coverage
Approximately 250-350 sq. ft. per activated gallon at 2.0-3.0 mils DFT (4.0-6.0 mils wet; assumes 15% material loss)
Cure and recoat
Pot life 45 minutes; foot traffic in 4-6 hours (depending on substrate porosity); apply finish coat after 5 hours and before 7 days; full cure 7 days (at 70°F / 50% RH)
Packaging
120 fl. oz. kit (base + activator); Flat Black (SKU 354982) and Flat White (SKU 355235)

From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.

Watch It Applied

Video coming soon

Mixing and application video for EP-55. Want to see it in person? It is part of our contractor training.

What Contractors Say About ECM

5.0 on Google · 149 reviews

Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
Richard Pollard

EP-55 Questions

Where can I buy EP-55 near Chicago?

Elite Coatings Midwest stocks Citadel EP-55 Water-Based Epoxy Primer at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.

What is EP-55 used for?

Hard-troweled concrete; Aluminum; Various types of tile; Primer/basecoat for warehouse line striping and zone marking.

What is the coverage rate of EP-55?

Approximately 250-350 sq. ft. per activated gallon at 2.0-3.0 mils DFT (4.0-6.0 mils wet; assumes 15% material loss) (manufacturer’s figure; actual coverage depends on the surface and how it is applied).

How long does EP-55 take to cure?

Pot life 45 minutes; foot traffic in 4-6 hours (depending on substrate porosity); apply finish coat after 5 hours and before 7 days; full cure 7 days (at 70°F / 50% RH) (manufacturer’s figures; times vary with temperature and humidity).

Call Get Pricing

Get Pricing

Tell us what you need. We reply with today's price, usually the same business day.

Or call 708-629-0825