
ARDEX P 51 Primer for Underlayments
Joint Maintenance and Structure Repair
ARDEX P 51 is a solvent-free primer for the installation of ARDEX underlayments and toppings over absorbent concrete.
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
ARDEX P 51 is a solvent-free primer for the installation of ARDEX underlayments and toppings over absorbent concrete.
Key Features
*For specialized applications and with select underlayments, ARDEX P 51 also can be used for priming wood, gypsum and non-water soluble adhesive residue over concrete.
- For absorbent concrete, wood*, gypsum* and non-water-soluble adhesive residue on concrete*
- Concentrated primer – dilutes with water
- Seals the substrate
- For bonding ARDEX underlayments and toppings to appropriate substrates
- For interior use only
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Solvent-free concentrate that is diluted with water on site
- Seals the substrate before ARDEX underlayments and toppings
- Helps bond ARDEX underlayments and toppings to the substrate
- Double-prime method helps prevent bubbles and pinholes over very absorbent surfaces
Where to Use It
- Priming absorbent concrete and absorbent terrazzo before ARDEX underlayments/toppings
- Double-priming gypsum and extremely absorbent concrete
- Wood and non-water-soluble adhesive residue only with select ARDEX underlayments
- Interior use only
How to Apply
- Mechanically clean the substrate so it is sound, dry and free of contaminants; vacuum thoroughly
- Dilute with clean water by volume: 1:1 for standard absorbent concrete; 3 parts water to 1 part primer for the first coat of a double prime
- Stir with a paint stirrer to bring settled components back into suspension; do not mechanically mix
- Over concrete, apply evenly with a soft-bristled push broom (short-nap roller over plywood); no mops or sprayers
- Leave no bare spots and brush out puddles and excess primer
- Confirm dryness with a water-rub test (water stays clear) before installing the underlayment
Coverage & Cure
- Coverage
- Approx. 400-600 sq. ft. per gallon per coat, dependent on surface profile, density and porosity
- Cure and recoat
- Standard 1:1 coat: min. 30 minutes, max. 24 hours. Double prime: first coat (3 water : 1 primer) 1-3 hours, second coat (1:1) 30 minutes-24 hours. Undiluted over wood/adhesive residue: 3-24 hours. Primer must dry to a clear, thin film before the underlayment goes on.
- Packaging
- 1 gallon (3.78 L) container; 4 gallon (15.14 L) pail
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied

Video coming soon
Mixing and application video for P 51. Want to see it in person? It is part of our contractor training.
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
P 51 Questions
Where can I buy P 51 near Chicago?
Elite Coatings Midwest stocks ARDEX P 51 Primer for Underlayments at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is P 51 used for?
Priming absorbent concrete and absorbent terrazzo before ARDEX underlayments/toppings; Double-priming gypsum and extremely absorbent concrete; Wood and non-water-soluble adhesive residue only with select ARDEX underlayments; Interior use only.
What is the coverage rate of P 51?
Approx. 400-600 sq. ft. per gallon per coat, dependent on surface profile, density and porosity (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does P 51 take to cure?
Standard 1:1 coat: min. 30 minutes, max. 24 hours. Double prime: first coat (3 water : 1 primer) 1-3 hours, second coat (1:1) 30 minutes-24 hours. Undiluted over wood/adhesive residue: 3-24 hours. Primer must dry to a clear, thin film before the underlayment goes on. (manufacturer’s figures; times vary with temperature and humidity).



