
ARDEX SD-M Designer Floor Finish & Concrete Topping (White)
Concrete Resurfacing & Toppings
ARDEX SD-M is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utilit
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
ARDEX SD-M is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.
Key Features
- Use over concrete, terrazzo and ceramic, quarry and porcelain tile
- Provides a smooth, permanent, durable finish
- Easy to mix and apply
- Mixes with water only, no additives necessary
- Outstanding coverage with excellent bond
- Mold and mildew resistant
- Portland cement-based
- Use for interior floors only
- Can be used to create a burnish-polished surface on indoor concrete
- Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Gives a smooth, durable, permanent wear finish over concrete and tile
- Water-only mix with no additives required
- Good coverage and strong bond in a thin, two-coat system
- Can be burnish-polished, or used as a pinhole filler for polished concrete
- Mold and mildew resistant, with zero VOCs
Where to Use It
- Interior floors over concrete, terrazzo, and ceramic, quarry or porcelain tile
- Warehouses, utility rooms and light manufacturing areas
- Areas with foot traffic and moderate rubber-wheeled forklift traffic
- Pinhole filling in polished concrete / ARDEX Polished Concrete Systems
How to Apply
- Mechanically clean to a sound, dry, contaminant-free substrate and vacuum thoroughly
- Prime where needed: ARDEX P 51 over absorbent concrete (optional, reduces pinholes), ARDEX EP 2000 over non-porous terrazzo
- Mix 2 quarts (1.9 L) of clean water per 10 lb bag (or 2.5 parts powder to 1 part water by volume) for 2-3 minutes; do not overwater
- Key in with the flat side of a steel trowel, using as little material as possible to feather onto the surface
- Apply 2-3 coats (about 20 mils total, max. 1/16"), recoating once each coat has hardened
- Seal or coat with a product suited to the service conditions
Coverage & Cure
- Coverage
- 80-100 sq. ft. (7.4-9.3 m²) per bag with a 2-coat application, dependent on surface profile, density and porosity
- Cure and recoat
- Pot life 30-40 minutes (70°F); initial set approx. 45 min, final set approx. 90 min; walkable in 2 hours. Waterborne sealer (≤ 20 mils): once hardened and uniform in tone, typically 2-3 hours; solvent-borne / 100% solids ≤ 20 mils: 24 hours; coatings over 20 mils: 3-5 days; processing as pinhole filler: 24-72 hours.
- Packaging
- 10 lb (4.5 kg) bag; available in Gray and White
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
SD-M White Questions
Where can I buy SD-M White near Chicago?
Elite Coatings Midwest stocks ARDEX SD-M Designer Floor Finish & Concrete Topping (White) at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is SD-M White used for?
Interior floors over concrete, terrazzo, and ceramic, quarry or porcelain tile; Warehouses, utility rooms and light manufacturing areas; Areas with foot traffic and moderate rubber-wheeled forklift traffic; Pinhole filling in polished concrete / ARDEX Polished Concrete Systems.
What is the coverage rate of SD-M White?
80-100 sq. ft. (7.4-9.3 m²) per bag with a 2-coat application, dependent on surface profile, density and porosity (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does SD-M White take to cure?
Pot life 30-40 minutes (70°F); initial set approx. 45 min, final set approx. 90 min; walkable in 2 hours. Waterborne sealer (≤ 20 mils): once hardened and uniform in tone, typically 2-3 hours; solvent-borne / 100% solids ≤ 20 mils: 24 hours; coatings over 20 mils: 3-5 days; processing as pinhole filler: 24-72 hours. (manufacturer’s figures; times vary with temperature and humidity).



