
ARDEX K 40 RAPID Self-Leveling Underlayment
Self-Leveling Underlayments
Use to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water-soluble adhesive residue on concrete Rapid dry technology – Install most flooring in as little as 2 hours* Levels from 1/8” (3 mm) up to 1” (24 mm) thick
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
Key Features
† Must be sound, solid and well-bonded to underlying, structurally sound concrete substrates.
- Concrete (structurally sound)
- Absorbent terrazzo on concrete†
- Properly installed ARDEX moisture control systems on concrete: ARDEX MC RAPID
- Other approved, non-porous materials on concrete†: Epoxy terrazzo; non-porous (non-absorbent) cementitious terrazzo
- Ceramic, quarry or porcelain tiles
- Epoxy coatings
- Non-water-soluble adhesive residue
- Concrete treated with certain curing compounds (test areas only; see “ Proper Prep ” page for instructions)
Key Features
- Use to level and smooth interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems and non-water-soluble adhesive residue on concrete
- Rapid dry technology – Install most flooring in as little as 2 hours
- Levels from 1/8” (3 mm) up to 1” (24 mm) thick
- Interior use only
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Rapid drying: most flooring can go down in as little as 2 hours
- High-flow formula levels from 1/8" up to 1" thick
- Levels concrete, terrazzo, tile and epoxy coatings in one product
- Can be pumped with ARDIFLO mixing pumps for large areas
- Zero VOC; interior use
Where to Use It
- Leveling and smoothing interior concrete and absorbent terrazzo
- Over ceramic, quarry or porcelain tile, epoxy coatings and approved adhesive residue on concrete
- Over ARDEX MC RAPID or ARDEX VB 100 moisture control
- Interior, dry areas only
How to Apply
- Mechanically prepare the substrate (sound, clean, dry; CSP 3-5 where required) and vacuum thoroughly
- Prime: ARDEX P 51 at 1:1 (or ARDEX P 4) on absorbent concrete, double-prime very absorbent concrete, ARDEX P 82 or P 4 on non-porous surfaces
- Mix two bags at a time, 6-6 1/2 quarts (5.7-6.1 L) of clean water per 50 lb bag, with a 1/2" drill for 2-3 minutes; do not overwater
- Pour, spread with the spreader, and immediately smooth or spike-roll, working continuously
- Install at an average minimum of 1/8"; use ARDEX Feather Finish where a true featheredge is needed
Coverage & Cure
- Coverage
- 56 sq. ft. per bag at 1/8" (5.2 m² at 3 mm), dependent on surface profile, density and porosity
- Cure and recoat
- Flow time 10 minutes (70°F). Moisture-insensitive tile: 2 hours. Other floor coverings: 2 hours up to 1/2", 4 hours over 1/2". Wood flooring or high-performance (epoxy/urethane) adhesives: 12 hours.
- Packaging
- 50 lb (22.7 kg) bag
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
K40 Rapid Questions
Where can I buy K40 Rapid near Chicago?
Elite Coatings Midwest stocks ARDEX K 40 RAPID Self-Leveling Underlayment at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is K40 Rapid used for?
Leveling and smoothing interior concrete and absorbent terrazzo; Over ceramic, quarry or porcelain tile, epoxy coatings and approved adhesive residue on concrete; Over ARDEX MC RAPID or ARDEX VB 100 moisture control; Interior, dry areas only.
What is the coverage rate of K40 Rapid?
56 sq. ft. per bag at 1/8" (5.2 m² at 3 mm), dependent on surface profile, density and porosity (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does K40 Rapid take to cure?
Flow time 10 minutes (70°F). Moisture-insensitive tile: 2 hours. Other floor coverings: 2 hours up to 1/2", 4 hours over 1/2". Wood flooring or high-performance (epoxy/urethane) adhesives: 12 hours. (manufacturer’s figures; times vary with temperature and humidity).



