
ARDEX FEATHER FINISH Skim Coat & Patching Underlayment
Patching & Skim Coats
ARDEX FEATHER FINISH is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
ARDEX FEATHER FINISH is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
Key Features
- Self-drying, finish underlayment
- Provides a smooth surface prior to the installation of floor covering over a variety of substrates
- A blend of Portland cement and other hydraulic cements
- Exceptional bond strength
- Easy to mix and apply
- Mixes with water only
- True featheredge
- Superior coverage – up to 300 sq. ft. per bag*
- Mold and mildew resistant
- Install floor coverings in as little as 15 minutes
- Interior use only
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Floor coverings can go down in as little as 15 minutes
- Feathers out to a true featheredge for seamless transitions
- Mixes with water only, with no additives to measure
- Strong bond, and priming is not needed in most applications
- Resists mold and mildew and contains zero VOCs
Where to Use It
- Smoothing concrete, plywood, terrazzo and other approved substrates before new flooring
- Prep under sheet vinyl, VCT, carpet, ceramic and similar coverings
- Patching and skim-coating interior, dry areas on any grade level
- Embossing filler over residential sheet vinyl when mixed with ARDEX P 82
How to Apply
- Mechanically clean the substrate (e.g., shot blast) so it is sound, dry and free of contaminants; no acid etching or solvents
- Prime only where required (e.g., ARDEX P 51 double-prime over gypsum or very absorbent concrete; ARDEX P 82 over epoxy or metal)
- Mix 2 1/2 quarts (2.4 L) of clean water per 10 lb bag (or 2 parts powder to 1 part water by volume for small batches)
- Add powder to water and mix 2-3 minutes with a 1/2" drill (min. 650 rpm) to a lump-free consistency; do not overwater
- Key a tight first pass in with the flat side of a steel trowel, then build to the needed thickness (up to 1/2" in most cases)
Coverage & Cure
- Coverage
- Per 10 lb bag: 16.7 sq. ft. at 1/4" (6 mm); 33.3 sq. ft. at 1/8" (3 mm); 100-300 sq. ft. at a skim coat (varies with surface texture)
- Cure and recoat
- Pot life approx. 15-20 minutes at 70°F. Install most flooring once hardened (typically 15-20 minutes); wait 16 hours before wood flooring or high-performance (epoxy/urethane) adhesives.
- Packaging
- 10 lb (4.5 kg) bag
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
FEATHER FINISH Questions
Where can I buy FEATHER FINISH near Chicago?
Elite Coatings Midwest stocks ARDEX FEATHER FINISH Skim Coat & Patching Underlayment at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is FEATHER FINISH used for?
Smoothing concrete, plywood, terrazzo and other approved substrates before new flooring; Prep under sheet vinyl, VCT, carpet, ceramic and similar coverings; Patching and skim-coating interior, dry areas on any grade level; Embossing filler over residential sheet vinyl when mixed with ARDEX P 82.
What is the coverage rate of FEATHER FINISH?
Per 10 lb bag: 16.7 sq. ft. at 1/4" (6 mm); 33.3 sq. ft. at 1/8" (3 mm); 100-300 sq. ft. at a skim coat (varies with surface texture) (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does FEATHER FINISH take to cure?
Pot life approx. 15-20 minutes at 70°F. Install most flooring once hardened (typically 15-20 minutes); wait 16 hours before wood flooring or high-performance (epoxy/urethane) adhesives. (manufacturer’s figures; times vary with temperature and humidity).



