
ARDEX MRF Moisture-Resistant Skim Coat & Patch
Patching & Skim Coats
ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment is a trowel-grade underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth surface prior to the installation of ARDEX MC Moisture Control Systems or moisture-resistant adhesiv
- In stock locally in Oak Forest, IL
- Technical support from experienced installers
- Pickup at our Oak Forest warehouse
Product Details
ARDEX MRF Moisture-Resistant, Rapid-Drying, Skimcoat Patching Underlayment is a trowel-grade underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth surface prior to the installation of ARDEX MC Moisture Control Systems or moisture-resistant adhesives and flooring.
Key Features
- Provides a smooth surface over a variety of substrates
- Engineered to withstand 100% RH; unlimited moisture and water
- Interior and exterior use
- ARDEX WeatherProof Technology
- Suitable for installation at temperatures as low as 40°F (5°C)
- Non-sanded – install from a true featheredge up to 1/2” (12 mm)
- Rapid-drying – install floor coverings in as little as 30 minutes
Data sheets and application help
Ask us for the technical data sheet (TDS), safety data sheet (SDS) or application instructions, or call 708-629-0825 to talk through your job.
Why Contractors Use It
- Built to withstand 100% RH; unaffected by moisture and water
- Rapid drying: floor coverings can go down in as little as 30 minutes
- Usable indoors and outdoors, and installable down to 40°F (5°C)
- Water-only mix that feathers to a true featheredge, up to 1/2" thick
- Zero VOC and suitable for castor-wheel loads under finished flooring
Where to Use It
- Skim-coating and patching before moisture control systems or moisture-resistant adhesives and flooring
- Smoothing concrete, terrazzo, plywood (interior only) and other approved substrates
- Interior or exterior repairs on any grade level (not a wear surface)
How to Apply
- Prepare a sound, clean, dry substrate by mechanical means; no acid etching or solvents
- Prime only where required (e.g., ARDEX P 51 double-prime over gypsum or very absorbent concrete; ARDEX P 82 over epoxy)
- Mix 1 3/4 quarts (1.65 L) of clean water per 10 lb bag (or 3.25 parts powder to 1 part water by volume) for 2-3 minutes; do not overwater
- Key in a tight first pass with the flat side of a steel trowel, then build to thickness (up to 1/2" interior, 1/4" exterior)
Coverage & Cure
- Coverage
- Per 10 lb bag: 28 sq. ft. at 1/8" (2.6 m² at 3 mm); 56 sq. ft. at 1/16" (5.2 m² at 1.5 mm); 200-250 sq. ft. at a skim coat (varies with surface texture)
- Cure and recoat
- Pot life approx. 15-20 minutes at 70°F. Install most flooring once hardened (typically 30 minutes); wait 16 hours for wood flooring or high-performance (epoxy/urethane) adhesives.
- Packaging
- 10 lb (4.5 kg) bag
From the manufacturer’s published data (source 1, source 2). Always follow the current technical data sheet; ask us for the TDS and SDS.
Watch It Applied
What Contractors Say About ECM
Ed and his son Matt are phenomenal. The product they sell is top notch and they truly know their craft. Between the great tech help and the great prices this business is the best. I’ve used most coating supply companies in the area over the years and have finally found my forever supplier.
MRF Questions
Where can I buy MRF near Chicago?
Elite Coatings Midwest stocks ARDEX MRF Moisture-Resistant Skim Coat & Patch at 16410 Kilbourn Ave in Oak Forest, IL, in Chicago’s south suburbs, for pickup. Call 708-629-0825 or request pricing online.
What is MRF used for?
Skim-coating and patching before moisture control systems or moisture-resistant adhesives and flooring; Smoothing concrete, terrazzo, plywood (interior only) and other approved substrates; Interior or exterior repairs on any grade level (not a wear surface).
What is the coverage rate of MRF?
Per 10 lb bag: 28 sq. ft. at 1/8" (2.6 m² at 3 mm); 56 sq. ft. at 1/16" (5.2 m² at 1.5 mm); 200-250 sq. ft. at a skim coat (varies with surface texture) (manufacturer’s figure; actual coverage depends on the surface and how it is applied).
How long does MRF take to cure?
Pot life approx. 15-20 minutes at 70°F. Install most flooring once hardened (typically 30 minutes); wait 16 hours for wood flooring or high-performance (epoxy/urethane) adhesives. (manufacturer’s figures; times vary with temperature and humidity).



